Followers

Saturday, May 26, 2018

STAMPRINTS DT

Hello My Crafty Friends,
I want to share a card with you that I made for the Stamprints DT.

I love butterflies and flowers so for sure love these images...
...For This Card - Step By Step...
 Printed out the butterflies, sentiment and flower on Kraft paper.
After coloring the images, fussy cut around the butterflies, cut out the image/text.
Went around the image and text with distress ink.
Used light brown cardstock for the card base.
Cut a piece of dark brown cardstock to fit the center of the card.
Embossed the cardstock, went over it with distress ink, taped it onto the card.
 Taped the image onto the center of the card.
Curled the ends and center of the text with a pencil, taped it onto the card.
Added pop-dots to the back of each butterfly then attached them to the card.

..Products Used...
Marco Raffine Colored Pencils
Darice Embossing Folder 'Fall Leaves Swirl'
Ranger Tim Holtz Distress Ink Pad 'Tattered Rose'
Forever In Time 'Pop-Dots'
Plus Tape Runner
Ad-tech Crafter's Precision Glue
Light Brown/Dark Brown/Kraft Cardstock

I hope you like my card and it gives you some inspiration.

Have a great day and thank you for visiting.
 Happy Crafty Hugs,
Sherry x

Friday, May 25, 2018

THE OUTLAWZ

Hello My Crafty Friends,
I have a card I want to share with you all for a challenge at The Outlawz

I enjoyed coloring this beautiful perfume bottle.
...For This Card - Step By Step...
  White cardstock for the card base.
Cut a piece of patterned paper to fit the center of the card.
Cut a piece of green cardstock to fit the center of the patterned paper. 
Cut the image out, then fussy cut around the base of it.
Added distress ink around the card, image, green paper and patterned paper.
Taped the patterned paper onto the center of the card. 
Taped the green paper to the center of the patterned paper. 
Cut a piece of doily tape to go across the card and attached it.
Put foam mounting tape on back of the image and tape on back of the base part. 
Attached the image to the card with the base sitting on the doily tape.
Then glued two flatback pearls on the green cardstock.
...Products Used... 
Digistamp 'Perfume Bottle' By: Sandi's Samples
Marco Raffine Colored Pencils
KaiserCraft 6.5" Paper Pad 'Fairy Dust'
Tim Holtz Ranger Distress Ink Pad 'Tea Dye'
Elizabeth Craft Designs Fine Point Scissors
Darice Doily Tape
Flatback Pearls
Scotch Foam Mounting Tape 
Ad-tech Crafter's Precision Glue
Plus Tape Runner
Green/White Cardstock

Have a great day and thank you for visiting. 
 Happy Crafty Hugs,
Sherry xx

...Challenge Entered...
The Outlawz - Freebie Progressive Challenge

Thursday, May 24, 2018

CUTE AS A BUTTON MAY INSPIRATION

Hello There My Crafty Friends,
I would like to share a card I made with you all for the
Cute As A Button Showcase Blog

I love this sweet little girl with her bunny friend called Bunny Walk.
She looks like she is intent on where she is going. Grandma's house maybe? :)
...For This Card - Step By Step...
  White cardstock for the card base.
Used the distress ink pad on a piece of brown cardstock.
Cut a piece of ribbon and glued it onto the brown cardstock, ends in back.
Taped the brown cardstock onto the card.
Cut the image and a piece of pink cardstock out with oval frame dies.
Used the paper crimper on the pink frame, then taped the image to it.
Taped both onto the center of the card.
Using stamens for the center of the flowers, I put pink/white and blue/white together.
Glued the stamen ends to the back of the flowers, then glued the flowers on the card.
 Next I glued the flourishes dies from beneath the flowers.
Then glued the butterfly and hearts onto the card.
 
...Products Used...
Digistamp 'Bunny Walk' By: Cute As A Button
Marco Raffine Colored Pencils
Ranger Tim Holtz Distress Ink Pad 'Tea Dye'
Fiskars Paper Crimper
Tattered Lace Flourishes Dies
Wilton Flower Stamens
Flowers and Ribbon
Unbranded Frame Die
Unbranded Butterfly Die
Hearts - from a butterfly die
Ad-tech Crafter's Precision Glue
Beacon Gem-Tac Glue
Plus Tape Runner
Pink/Brown/White Cardstock

I hope you like my card and it gives you some inspiration.

If you're looking for some more inspiration come visit...
 There are many more wonderful images to chose from at...
  You are also invited to join the...  
 
Thank you for visiting.
Happy Crafty Hugs,
Sherry xx

Saturday, May 19, 2018

CRAFTY FRIENDS GUEST DESIGNER #84

Hello There Crafty Friends,
SheepSki Designs DT members were asked if we would like to be a guest designer for...
Crafty Friends Challenge Blog. Of course I said yes. :)

...The theme for this challenge is...
...B is for...'Use as many 'B' items as you can on your project'...
E.g. boy, bunnies, bows, buttons, butterflies, bike, bears etc.

I love the beautiful 'Butterfly Girl' and enjoyed coloring her for this card...
 ...For This Card - Step By Step...
White cardstock for card base.
 Cut a piece of cardstock to fit the center of the card.
Embossed it, went over it with ink, then taped it to the card.
Cut out the image with a frame die, went around it with distress ink, taped it to the card.
Taped the butterfly die cut onto the card, then glued flatback pearls on it.

...Products Used...
Digistamp 'Butterfly Girl' By: SheepSki Designs 
Marco Raffine Colored Pencils
Darice Embossing Folder 'Fall Leaves Swirl'
Lawn Fawn Ink Cube 'Wild Rose' 
Ranger Tim Holtz Distress Ink Pad 'Tattered Rose'
Flatback Pearls
Unbranded Frame Die
Ad-tech Crafter's Precision Glue
Plus Tape Runner
Pink/White Cardstock

I hope you like my card and it gives you some inspiration. 
Come on and join us in the fun!

Thank you for visiting!
Happy Crafty Hugs, 
Sherry x

Wednesday, May 16, 2018

SCRAPY LAND CHALLENGE #90

Hello My Crafty Friends,
I want to let you all know that a new challenge starts today at Scrapy Land
The theme is 'Anything Goes' using any brand of die that Scrapy Land sells.
 
...Here's what I made for this challenge...
I love the wolf die and this time I left the moon on there. :)
I love feathers too and think they go well together.
I wanted to make a nighttime scene.
I used a brown paper bag to cut out the tree and one of the feathers. 
You may be able to see a little bit of the red letters on the feather...adds more character, lol.
 ...For This Card - Step By Step... 
Grey cardstock for the card base.
 Cut the cardstock the size I wanted to make my card.
Then folded each side to meet together in the center.
Went over the front of the card with distress ink.
Ran the card through the machine to emboss it.
Used distress ink on the doily die cut then cut it in half.
Taped a piece of the doily on each side of the card. 
Glued the tree on the right side of the card.
Cut out the wolf die cut in grey and white cardstock.
Cut a piece of yellow cardstock to fit behind the moon outline, glued it on.
Then glued the white wolf on back of the grey one.
Cut pop-dots in half and put on the back of the wolf, attached the wolf to the card.
Glued three feathers together, then tied a piece of twine around them.
Taped the feathers to the card.
Then used the white gel pen to make stars.
You can see the embossing on the inside and it shows on the back as well.
 
...Used These Dies...
Spellbinders Die-Delights 'Whimsical Tree'
Spellbinders Shapeabilities 'Feather Dies'
Spellbinders Shapeabilities Inspire 'Howling Die'
Darice Craft Dies 'Doily'
 
...Other Products Used...
Lifestyle Crafts QuicKutz Embossing Folder 'Tea Party'
Ranger Tim Holtz Distress Ink Pad 'Tea Dye'
Darice Hemp Cord/Twine
Sakura Gelly Roll 'White' Gel Pen
Forever In Time Pop-Dots
Plus Tape Runner
Ad-tech Crafter's Precision Glue
Brown Paper Bag, Grey/Yellow/White Cardstock

I hope you like my card and it gives you some inspiration.
There's great prizes to be won, so come on and join us in the fun!
 
Have a great day and thank you for visiting.
 Happy Crafty Hugs,  
Sherry x

Tuesday, May 15, 2018

THE CREATIVE CRAFTERS CHALLENGE #4

Hi There My Crafty Friends,
I want to let you all know that our third challenge is starting today at... 
 The Creative Crafters
 Our theme is 'Anything Goes'
 
...Our lovely sponsor this month is...
SPONSOR COORDINATOR - LEANN'S WORLD 101 
Prize for Winner: 2 digital stamps of your choice from the... 
LeAnn's World 101 Etsy Shop 
 
 ...I really enjoyed coloring 'Cindy's Umbrella'...
She is so pretty!
 ...For This Card - Step By Step...
White cardstock for the card base.
Cut a piece of patterned paper to fit the center of the card, then taped it on.
Cut the image out, went around it with distress ink, then taped it to the center of card.
I printed out extra butterflies and the flower in her hair, so fussy cut them out.
Put half a pop-dot on the back of each one of them, placed them over the ones on the image.
I added two butterflies to the butterfly that is on the umbrella, as I wanted it raised farther.
Glued the leaves onto the card.
I had made my own rolled flowers, so glued three of them on.
 ...For the flowers I made...
With a scrap piece of paper, I cut out a circle 'not perfect for sure', lol.
Then cut out a swirl (I guess you would call it that) in the circle.
Starting from the beginning/outer part, roll it and glue it to the end of the roll.
The swirl cut doesn't need to be straight, unless you want it to.
Then I use a pair of tweezers and curl over the top part of the petals.

...Products Used...
Marco Raffine Colored Pencils
The Paper Studio 6"x12" 'Country Road' Paper Pack
Sizzix Vintaj BigKick Die Cut Machine
Ranger Tim Holtz Distress Ink Pad 'Tea Dye'
Rolled Flowers 
Unbranded Leaf Dies
Forever In Time Pop-Dots
Ad-tech Crafter's Precision Glue
Beacon Gem-Tac Glue
Plus Tape Runner
Yellow/Pink/White Cardstock
 
...I also want to share a card I made using the beautiful 'Molly'...
 
...For This Card - Step By Step...
White cardstock for the card base.
Cut a piece of yellow cardstock to fit the center of the card.
Embossed it, went over it with ink, then taped it on.
Cut the image out with a frame die, then taped it slightly slanted onto the card.
 
...Products Used...
Digistamp 'Molly' By: LeAnn's World 101
Marco Raffine Colored Pencils
Sizzix Vintaj BigKick Die Cut Machine
Darice Embossing Folder 'Fall Leaves Swirl'
Lawn Fawn Ink Cube 'Celery Stick'
Unbranded Frame Die
Plus Tape Runner
Yellow/White Cardstock
 

You may also want to visit the LeAnn's World 101 Facebook Group.
I hope you like my cards and they give you some inspiration.
The challenge runs from May 15th to June 8th. 
Come on and join us in the fun!

Thank you for visiting!
Happy Crafty Hugs,
Sherry x

Monday, May 14, 2018

LEANN'S WORLD 101

Hello My Crafty Friends,
I want to share a card I made with you all using an image from...
 
I used to enjoy riding a bike. Would love get on one now but don't dare, 
can't imagine how that would turn out, lol.
I had fun making this card and even made the tag where it can be taken out.
That's a first for me. :)
  ...For This Card - Step By Step..
  White cardstock for the card base.
Cut a piece of pink patterned paper to fit the center of the card.
Cut a piece of blue patterned paper to fit the center of the pink paper.
 Went around the papers and sentiment with the distressing tool.
Cut out the image with a frame die.
Cut out the tag with the same pink patterned paper.
Used a ink pad around the sentiment, tag, both papers, the image and card.
Taped the pink paper to the card, then the blue paper.
Put tape on back of the image, bottom and sides only - for the tag.
Taped the image onto the card.
Tied a piece of twine on the tag and tucked the tag behind the image.
Then taped the sentiment to the card.

...Products Used...
Marco Raffine Colored Pencils
KaiserCraft 6.5" Paper Pad 'Bombay Sunset'
Prima Marketing Distressing Tool
Ranger Tim Holtz Distress Ink Pad 'Tattered Rose' 
Darice Hemp Cord/Twine
Unbranded Frame and Tag Dies
Plus Tape Runner 
White Cardstock
 
I hope you like my card. 
 
...There are monthly challenges at...
LeAnn's World 101 Facebook Group
Come on and join in the fun!

..There's a beautiful greyscale coloring book available for purchase...
Happy Crafty Hugs,   
Sherry x